HRD-150CS Rockwell Hardness Tester na-anya moto (nleba anya dijitalụ)

HRD-150CS Rockwell Hardness Tester na-akwọ ụgbọala (nleba anya dijitalụ) Foto egosipụtara

Nkọwa dị mkpirikpi:

Igwe a na-arụ ọrụ na-aga n'ihu, uru ngosi ziri ezi yana ọrụ dị mfe.
Na-anabata ibu akpaka nke moto na-ebugharị, ibi na ibutu ya, enweghị mperi ọrụ mmadụ.
Shaft na-ebunye frictionless, ike nnwale dị elu
Enwere ike ịgụ ọnụ ọgụgụ HRA, HRB, HRC ozugbo site na nlele dijitalụ.
Nhọrọ maka ọnụ ọgụgụ Rockwell ọzọ
Nkenke ziri ezi kwekọrọ n'ụkpụrụ GB/T 230.2, ISO 6508-2 na ASTM E18.

Nkọwa ngwaahịa

Mkpado ngwaahịa

Vidiyo

Ngwa

Enwere ike iji ya nwalee hardness Rockwell nke siri ike alloy, carburized ígwè, ígwè siri ike, nchara nchara nchara, ígwè siri ike, aluminom alloy, ọla kọpa alloy, ihe nkedo malleable, nchara dị nro, ígwè na-ekpo ọkụ, ígwè annealed, ígwè na-ebu ígwè, wdg.

Atụmatụ

Spindle na-enweghị esemokwu na-eme ka o doo anya na ike nnwale ziri ezi;

A na-emecha ike nnwale na nbudata na eletrik na-enweghị njehie ọrụ mmadụ;

Arọ nke kwụsiri ike kwụsiri ike na sistemu spindle bụ isi na-eme ka uru ike siri ike dịkwuo mma ma kwụsie ike;

Ọkpọkpọ oku ahụ nwere ike gụọ nha nha HRA, HRB na HRC ozugbo;

Nka nka

Oke nha: 20-95HRA,10-100HRB,10-70HRC

Ike ule izizi: 10Kgf(98.07N)

Ngụkọta ike ule: 60Kgf(558.4N),100Kgf(980.7N),150Kgf(1471N)

Oke. elu nke mpempe ule: 175mm

Omimi nke akpịrị: 135mm

Oge obibi: 2 ~ 60S

Ụdị ihe ntinye: diamond cone indenter, φ1.588mm ihe ntinye bọọlụ

Njikwa ụgbọ: Ntinye akpaaka / Ebe obibi / nbudata

Ọgụgụ isi ike bara uru: nlele dijitalụ

Min. ọnụ ahịa ọnụ ọgụgụ: 0.1HR

Akụkụ: 450 * 230 * 540mm, mbukota nha: 630x400x770mm

Ike ọkọnọ: AC 220V/50Hz

Net / Nnukwu arọ: 80kg / 95kg

Nhazi ọkọlọtọ

Igwe isi	1 Tọọ	Diamond Cone Indenter	1 PC
Standard Rockwell Hardness Block		Ihe ntinye bọọlụ ф1.588mm	1 PC
HRB	1 PC	Igwe ọkụ ọkụ	1 PC
HRC (Elu, ọnụ ahịa dị ala)	Mkpokọta 2 PC	Spanner	1 PC
Anvil (Big, Middle, "V"-Eyi)	Mkpokọta PC 3	Ndepụta nkwakọ ngwaahịa na asambodo	1 oyiri